By buying this product you can collect up to 5 MRM Reward Points.
The compact (0.4″ × 0.5″) D24V3F12 switching step-down (or buck) voltage regulator takes an input voltage between 14.5 V and 42 V and efficiently reduces it to 12 V while allowing for a maximum output current of 300 mA. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.
The SHDN pin can be driven low (under 0.3 V) to turn off the output and put the board into a low-power state that typically draws 20 μA, and it can be driven high (above 2.3 V) to enable the board. If you do not need to use the shutdown feature, the SHDN pin can be directly connected to VIN to permanently enable the board. You should not leave this pin disconnected as this can result in unpredictable behavior.
These voltage regulators generate lower output voltages from input voltages as high as 42 V. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters) and have a typical efficiency between 80% to 90%, which is much more efficient than linear voltage regulators, especially when the difference between the input and output voltage is large.
This regulator’s thermal shutdown prevents damage from overheating, but it does not have short-circuit or reverse-polarity protection!
No customer comments for the moment.