DragonFly32 ACRO

DragonFly32

$20.00

IN STOCK, SHIPS IMMEDIATELY

Quick Overview:

The fastest flight controller you can buy!  

Now with improved sensor filtration for optimal performance!

Acro board has only Gyro + Accelerometer
Pro boards have Gyro, Accelerometer, Barometer & Compass

More details

  • PRO
  • ACRO

By buying this product you can collect up to 27 MRM Reward Points.


The popularity of this great little controller is ever growing. Our DragonFly32 flight control board is based on the hardware used in the popular Naze32 flight controllers. This powerful little board is perfect for your mini FPV, fixed wing or even larger multirotors.  Able to handle a tricopter to a hex, our Dragonfly32 is fully compatible with Baseflight & Cleanflight firmware and also supports all the same OSD, GPS & Bluetooth modules based on the MultiWii and APM platforms.

Choose the DragonFly32 that suits your needs!

The DragonFly32 Acro gives you basic flight modes like Manual Rate mode & Auto Leveling

The DragonFly32 Pro gives you the same great flight features as the Acro, but includes a barometer & compass onboard.  These additional sensors open up new flight modes, plus will give you altitude and heading if you are using an on screen display.

Both boards will support GPS, OSD, Bluetooth and run all the latest firmware.  Our boards have been redesigned to improve sensor layout, and includes 2 LDO Noise Filters; one dedicated to filtering gyro & accelerometer noise, the other filters out noise before it reaches the CPU and other components on the board.  Our new design should eliminate 433mhz UHF interference, dirty input voltage interference giving you much more reliable flight performance! 

We flash every DragonFly32 board we ship with the latest version of CLEANFLIGHT FIRMWARE.  If you would like an alternative firmware on your DragonFly32 we give you the option to change it.  

    Supported Firmware Baseflight / Cleanflight / Harakiri
    CPU: STM32 F1
    GYRO: MPU6050
    ACC: MPU6050
    BARO: MS5611
    MAG: HMC5883L
    Mounting Holes: 30mm x 30mm

powered by

Grade 
Nick s 02/03/2016

Awesome ACRO FC

After receiving a dud naze 32 I started looking around for the best board with a sat port. The guys at MRM hooked me up and even soldered my pins to my request a special way for both DF32s I ordered.

I have had absolutely no issues working with my two DF32s with Cleanflight and theyre both very, VERY solid performers.

VERY happy customer, and very pleased with the service from MRM

  • 2 out of 2 people found this review useful.
Grade 
kevin m 01/28/2016

Great board

I have been through many different naze clones and these are for sure my favorite. the quality is very good and I have seen less defects in these than any other clone. In fact I found some of the architecture in the naze rev6 annoying so this is my #1 choice.

  • 0 out of 3 people found this review useful.
Grade 
Shane E 09/12/2015

OSX 10.10 drivers

I had some issues finding the drivers that would work with OSX 10.10. I'll provide the link to what worked for me if anyone else is having this issue.
http://community.silabs.com/mgrfq63796/attachments/mgrfq63796/5/1783/1/SiLabsUSBDriverDisk.dmg.zip

  • 2 out of 2 people found this review useful.
Grade 
Dan D 06/02/2015

Terrific Board

I've used other boards, but once I started using this board, I won't use anything else. This board works great!

  • 5 out of 6 people found this review useful.
Grade 
Christopher B 03/22/2015

Solid high performing board.

Solid 32-bit flight controller for nimble mini builds (200mm-350mm size). Very responsive flight characteristics. Cleanflight compatible. MultiRotorMadness did a great job pre soldering the pins on. With the soldering, this board is a bargain. Barometer altitude hold (when insulated with foam) works well at over 40ft. Now for the bad news... this board suffers from the same on-board compass problems as the original board this is based on. This causes problems if you want to use advanced/experimental GPS features such as position hold and return-to-home. Hopefully in a future revision they will remove/disable the on-board compass so you can easily use the compass on most GPS modules.

  • 6 out of 6 people found this review useful.
Grade 
Pau M 03/13/2015

Operates flawless

Got two of them and work without any issue at all. Recommended.

  • 2 out of 3 people found this review useful.

Write a review

DragonFly32

DragonFly32

The fastest flight controller you can buy!  

Now with improved sensor filtration for optimal performance!

Acro board has only Gyro + Accelerometer
Pro boards have Gyro, Accelerometer, Barometer & Compass

Write a review

GPS & Receiver Connection Diagram


After saving your customized product, remember to add it to your cart.

Text




loader